大家好,今天小编关注到一个比较有意思的话题,就是关于linux 底层驱动学习的问题,于是小编就整理了5个相关介绍Linux 底层驱动学习的解答,让我们一起看看吧。
如何自学linux驱动开发,做驱动开发需要哪些方面的知识?
做嵌入式应用的话一般的编程就可以了。那么嵌入式驱动开发与内核开发的话就需要学习多个方面的知识。我就把这方面的要求给你交流一下:(一家之言啊,自己多年从事嵌入式开发的一点感悟)嵌入式驱动开发需要了解的知识大概有以下几类:
每一个操作系统都有自己的构架,应该了解驱动在整个系统中的具***置与构建驱动程序的主要事项2 总线知识,比如PCI、USB总线。
3 芯片知识。
驱动其实就是对设备上一些寄存器的配置、CPU与设备本身的通讯以及对不同命令的处理4 要做好驱动,必须对所使用的CPU体系结构有一个比较深刻的认识5 C++基本用不上,主要是C和汇编。
6 做驱动最好要懂内核调试(比如说linux)
linux如何安装驱动?
在 Linux 系统中安装驱动的方法依赖于具体的设备和驱动类型。以下是一般的:
1. 确定设备型号和驱动类型:首先,需要确定您要安装的设备型号和对应的驱动类型。这可以通过设备的规格书、制造商的网站、Linux 社区等途径获取。
2. 检查内核模块:许多驱动已经包含在 Linux 内核中。您可以通过运行 `l***od` 命令查看当前加载的内核模块,以确定是否已经存在该驱动。
3. 使用仓库安装:大多数 Linux 发行版提供了软件仓库,其中包含了各种常见的设备驱动。您可以使用包管理器(如 `apt`、`yum`、`dnf` 等)从仓库中安装驱动。例如,使用以下命令安装示例驱动 `drivername`:
```
sudo apt install drivername
Linux安装驱动需要下载对应驱动源码或二进制文件,然后通过终端进入驱动目录,运行make和make install命令进行编译和安装。
有些驱动需要先安装相关依赖库才能编译成功,最后需要重启系统让其生效。需要注意的是,安装驱动前最好备份相关的配置文件以防万一。
linux驱动程序是什么?
Linux驱动程序是一种软件模块,用于管理系统硬件设备和与之交互。它们控制着硬件操作,使操作系统能够和硬件设备通信,管理和监视设备。Linux系统中各种设备通常需要对应不同的驱动程序,包括但不限于CPU、内存、硬盘、网络设备、显卡、声卡等。
驱动程序通过在内核中加载,提供统一的接口,使用户可以轻松控制硬件设备。Linux驱动程序的编写需要深入了解硬件工作原理和内核机制,具备一定的编程技能和经验。
如何学习嵌入式linux?
stm32确实是一个瓶颈。而且现在毕业的相关专业的学生越来越多,stm32的技术门槛和[_a***_]确实相对容易掌握。那么在主流的电子行业对嵌入式的需求是比较大的。主要是在于Linux的广泛运行。哪怕是安卓系统也是可以运行在Linux相同的电路开发板上的。
开发板的话就不好推荐了,有点像广告了。
学习Linux分为两个大方向,底层驱动和上层运用,这也是操作系统的特点。底层涉及驱动系列,对于硬件有比较直接的相关性。而应用几乎和硬件没他大的关系,主要掌握的是如何使用Linux操作系统,涉及各种指令,可以看 很多Linux运用的书籍。进而写一些基于Linux GCC的程序来熟悉这个。可以玩一玩树莓派板子,这个资料比较多,可玩性,掌握知识是很有帮助的。最近出了新版的,可以备一个用来学习Linux。
而底层是比较枯燥的,需要投入比较多。主要是驱动层比较难,所以需求很多,不愁找不到工作。仅仅会单片机已经确实不太有很大的竞争力了。底层需要掌握很多知识,随便去买一个比较流行的开发板就行了,主要是资料多,不懂的好找到人来问。否则自己一个人遇到卡壳的就很慢了。可以看看原子的,stm32你应该知道他很出名,打算出Linux开发板了。
我目前只会各类单片机及电路板的设计,当然也自学了服务器后端的简单使用,以及网站前端开发,Android app开发,IOS还没怎么学,时间不那么丰富。你趁着毕业前三年的业余时间,学习一下是很不错的,时间相对多一点,但是也需要靠自觉性,毕竟你的同事可能都在打游戏,你能坚持走下去吗?
技术工作是非常枯燥的,希望你能有找到自己的方向,多积累,多思考。
嵌入式Linux其实范围很广,只以我个人经验简单说说。
我们简单的把嵌入式Linux开发工作分成几类:
Bootloader层开发
驱动层开发
根文件系统搭建
应用程序开发
其中:
Bootloader层开发和Linux关系不太大,一般用汇编语言+C语言,更类似单片机开发
如何学习linux驱动开发?
1. 学会写简单的makefile
2. 编一应用程序,可以用makefile跑起来
3. 学会写驱动的makefile
4. 写一简单char驱动,makefile编译通过,可以in***od, l***od,rmmod. 在驱动的init函数里打印hello world,in***od后应该能够通过dmesg看到输出。
5. 写一完整驱动, 加上read, write,ioctl, polling等各种函数的驱动实现。在ioctl里完成从用户空间向内核空间传递结构体的实现。
6. 写一block驱动, 加上read,write,ioctl,poll等各种函数实现。
7. 简单学习下内存管理, 这个是最难的,明白各种memory alloc的函数实现细节。这是linux开发的基本功。
8. 学习锁机制的应用,这个不是最难的但是最容易犯错的,涉及到很多同步和并发的问题。
9. 看内核中实际应用的驱动代码。你会发现最基本的你已经知道了,大的框架都是一样的,无非是read,write, ioctl等函数的实现,但里面包含了很多很多细小的实现细节是之前不知道的。这时候就要考虑到很多别的问题而不仅仅是基本功能的实现。
到此,以上就是小编对于linux 底层驱动学习的问题就介绍到这了,希望介绍关于linux 底层驱动学习的5点解答对大家有用。